stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Channel section steel is kind of carbon structural steel, for its high strength and good weld bility, it can be used in construction and automobile manufacture. We also provide flat bar plate, flat bulb steel, angle steel and other hot rolled steel. 
Hot-dip galvanized channel steel can be divided into hot-dip galvanized channel steel and hot-blown galvanized channel steel according to different galvanizing processes. A zinc layer is attached to the surface of the component, so as to achieve the purpose of anti-corrosion.
The main method of galvanizing the surface of channel steel is hot-dip galvanizing. Hot-dip galvanizing is developed from the older hot-dip galvanizing method, which has a history of 170 years since the application of hot-dip galvanizing to industry in France in 1836. However, in the past 30 years, with the rapid development of cold-rolled strip, the hot-dip galvanizing industry has developed on a large scale.

Among various coating methods for protecting steel substrates, hot-dip galvanizing is a very good one. It is in the liquid state of zinc, after quite complex physical and chemical action, not only a thick pure zinc layer is plated on the steel, but also a zinc-iron alloy layer is formed. This kind of plating method not only has the corrosion resistance characteristics of electro-galvanizing, but also has a zinc-iron alloy layer. It also has strong corrosion resistance unmatched by electro-galvanizing. Therefore, this plating method is especially suitable for strong corrosive environments such as various strong acids and alkali mists.

Ordinary carbon structural steel is also called ordinary carbon steel. The carbon content is 0.06-0.22%, with less than 0.25% being the most commonly used. Belonging to low carbon steel, each metal grade represents the lowest yield point of the steel when the thickness is less than 16mm.

Steel sheet pile is a kind of steel structure with linkage device on the edge, which can be freely combined to form a continuous and tight retaining wall or water retaining wall.
The specifications and models of U-shaped steel sheet piles are rich, and the length can be specially customized according to the requirements of customers, which brings great convenience to the construction and reduces the cost at the same time.

Steel sheet pile is a kind of steel structure with linkage device on the edge, which can be freely combined to form a continuous and tight retaining wall or water retaining wall.
The specifications and models of U-shaped steel sheet piles are rich, and the length can be specially customized according to the requirements of customers, which brings great convenience to the construction and reduces the cost at the same time.

Carbon steel coil is a commonly used metal material with a wide range of applications in many fields. It has good mechanical and processing properties and is widely used in fields such as automobile manufacturing, shipbuilding, construction, and bridges.

Steel sheet pile is a kind of steel structure with linkage device on the edge, which can be freely combined to form a continuous and tight retaining wall or water retaining wall.
The specifications and models of U-shaped steel sheet piles are rich, and the length can be specially customized according to the requirements of customers, which brings great convenience to the construction and reduces the cost at the same time.

Steel sheet pile is a kind of steel structure with linkage device on the edge, which can be freely combined to form a continuous and tight retaining wall or water retaining wall.
The specifications and models of U-shaped steel sheet piles are rich, and the length can be specially customized according to the requirements of customers, which brings great convenience to the construction and reduces the cost at the same time.

Steel sheet pile is a kind of steel structure with linkage device on the edge, which can be freely combined to form a continuous and tight retaining wall or water retaining wall.
The specifications and models of U-shaped steel sheet piles are rich, and the length can be specially customized according to the requirements of customers, which brings great convenience to the construction and reduces the cost at the same time.