Electric welding mesh is made by welding high-quality low-carbon steel wires, followed by surface passivation and plasticization treatment such as cold plating (electroplating), hot plating, PVC coating, etc. Achieve a flat mesh surface, uniform mesh, firm solder joints, good local machining performance, stability, good weather resistance, and good corrosion resistance.

Electric welding mesh is made by welding high-quality low-carbon steel wires, followed by surface passivation and plasticization treatment such as cold plating (electroplating), hot plating, PVC coating, etc. Achieve a flat mesh surface, uniform mesh, firm solder joints, good local machining performance, stability, good weather resistance, and good corrosion resistance.

Electric welding mesh is made by welding high-quality low-carbon steel wires, followed by surface passivation and plasticization treatment such as cold plating (electroplating), hot plating, PVC coating, etc. Achieve a flat mesh surface, uniform mesh, firm solder joints, good local machining performance, stability, good weather resistance, and good corrosion resistance.

304L stainless steel is remarkably similar to 304 stainless steel in their chemical composition. but there is one key difference. In grade 304 stainless steel, the maximum carbon content is set at 0.08%, whereas grade 304L stainless steel has a maximum carbon content of 0.03%. This is why the “L” in 304L can be interpreted as extra-low carbon.

304 stainless steel highly stands out in terms of corrosion resistance, heat resistance, low temperature strength and mechanical properties, being one of the most widely used types of stainless steel. In addition, it has exceptional hot-workability such as stamping and bending, without leaving heat treatment hardening phenomenon.

The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. 

The C-shaped steel profile is automatically formed by the C-shaped steel forming machine. The C-shaped steel forming machine can automatically complete the forming process of the C-shaped steel according to the given C-shaped steel size. C-shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing.

H-beam is an economical section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

H-beam is an economical section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.